uClibc on Coldfire (m68k) compile problems

[Jim Burnett]

Ok got it (GCC) to build with this.

../configure --prefix=/opt/phoenix --target=m68k-uclinux
--enable-languages=c --disable-werror --disable-libssp


Note the --disable-libssp

-JB

On Wed, Mar 17, 2010 at 10:49 AM, Jim Burnett <jimburnettva at gmail.com>wrote:

> Yeah I built binutils 2.20.1 no problem.
>
> Gcc 4.3.3 on the other hand.... no such luck..
>
> ake[2]: Entering directory
> `/home/jim/Newdev/toolchains/gcc-4.3.3/m68k-uclinux/libgcc'
> Makefile:144: ../.././gcc/libgcc.mvars: No such file or directory
> make[2]: *** No rule to make target `../.././gcc/libgcc.mvars'.  Stop.
> make[2]: Leaving directory
> `/home/jim/Newdev/toolchains/gcc-4.3.3/m68k-uclinux/libgcc'
> make[1]: *** [all-target-libgcc] Error 2
> make[1]: Leaving directory `/home/jim/Newdev/toolchains/gcc-4.3.3'
> make: *** [all] Error 2
>
>
>
> Building outside src folder too.....per GCC instructions....
>
>
>
> On Wed, Mar 17, 2010 at 9:55 AM, Bernhard Reutner-Fischer <
> rep.dot.nop at gmail.com> wrote:
>
>> On Wed, Mar 17, 2010 at 09:24:17AM -0400, Jim Burnett wrote:
>> >Fresh binutils-2.19 build (Just re-ran make install to get /opt/embedded
>> >fresh)
>>
>> >Checking multilib configuration for libgcc...
>> >make[2]: Entering directory
>> >`/home/jim/Newdev/toolchains/gcc-4.3.3/m68k-uclinux/libgcc'
>>
>> Current binutils is 2.20.1, current gcc is 4.4.3, fyi. For m68k, use
>> uClibc-0.9.31-rc1 (or current master branch).
>>
>
>
>
> --
>
> My Blog : http://www.jimmyburnett.com
>



-- 

My Blog : http://www.jimmyburnett.com