Segmentation fault when chroot build_i686/root

Tue Jan 24 19:58:01 UTC 2006

Hi Marcus,

thanks a lot ... I changed i686 to i386 und it works. In the past that 
was no problem :(

Cheerio, Miss Sophie!

Ralf

Marcus Crafter wrote:

> Hi Ralf,
>
> Hope all is going well.
>
> I've been able to chroot inside of a i386/i386 buildroot environment  
> without any problems.
>
> The other things is that it looks like you're using a uClibC snapshot  
> (from your configuration) - if you really want i686 then perhaps try  
> it again with a released version of uClibC and see if that works any  
> better. The snapshots are using latest code changes that haven't gone  
> through the release process just yet.
>
> Hope this helps somewhat :)
>
> Cheers,
>
> Marcus
>
> On 23/01/2006, at 9:55 PM, Buhlrich, Ralf wrote:
>
>> Hi List,
>>
>> a got an very nice effect today. I got the latest svn version out  of 
>> the repository,
>> and configured the buildroot. After a perfect build, i wan't to  
>> chroot to the directory
>> and I got the following error message:
>>
>> < At revision 13529. >
>>
>> ralf at ganymed:/usr/local/src/buildroot$ sudo /usr/sbin/chroot  
>> build_i686/root/
>> Segmentation fault
>> ralf at ganymed:/usr/local/src/buildroot$ ll
>> total 4668
>> drwxr-sr-x    9 ralf staff     117 2006-01-23 18:42 build_i686
>> -rw-r--r--    1 ralf staff    5955 2006-01-23 17:16 Config.in
>> drwxr-sr-x    2 ralf staff    4096 2006-01-23 18:42 dl
>> drwxr-sr-x    4 ralf staff    4096 2006-01-23 17:16 docs
>> -rw-r--r--    1 ralf staff    5761 2006-01-23 17:16 Makefile
>> drwxr-sr-x  128 ralf staff    4096 2006-01-23 17:16 package
>> -rw-r--r--    1 ralf staff 4739072 2006-01-23 18:42 rootfs.i686.ext2
>> drwxr-sr-x   14 ralf staff    4096 2006-01-23 17:16 target
>> drwxr-sr-x   11 ralf staff    4096 2006-01-23 17:15 toolchain
>> drwxr-sr-x   13 ralf staff    4096 2006-01-23 18:41  
>> toolchain_build_i686
>> ralf at ganymed:/usr/local/src/buildroot$
>>
>> Has anybody this effect too? Or any clues to solve it ?
>>
>> Best Regards
>>
>> Ralf Buhlrich
>> #
>> # Automatically generated make config: don't edit
>> #
>> BR2_HAVE_DOT_CONFIG=y
>> # BR2_alpha is not set
>> # BR2_arm is not set
>> # BR2_armeb is not set
>> # BR2_cris is not set
>> BR2_i386=y
>> # BR2_m68k is not set
>> # BR2_mips is not set
>> # BR2_mipsel is not set
>> # BR2_nios2 is not set
>> # BR2_powerpc is not set
>> # BR2_sh is not set
>> # BR2_sparc is not set
>> # BR2_x86_64 is not set
>> # BR2_x86_i386 is not set
>> # BR2_x86_i486 is not set
>> # BR2_x86_i586 is not set
>> BR2_x86_i686=y
>> BR2_ARCH="i686"
>> BR2_ENDIAN="LITTLE"
>>
>> #
>> # Build options
>> #
>> BR2_WGET="wget --passive-ftp"
>> BR2_SVN="svn co"
>> BR2_TAR_OPTIONS=""
>> BR2_DL_DIR="$(BASE_DIR)/dl"
>> BR2_SOURCEFORGE_MIRROR="easynews"
>> BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
>> BR2_TOPDIR_PREFIX=""
>> BR2_TOPDIR_SUFFIX=""
>> BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
>> BR2_JLEVEL=4
>>
>> #
>> # Toolchain Options
>> #
>>
>> #
>> # Kernel Header Options
>> #
>> # BR2_KERNEL_HEADERS_2_4_25 is not set
>> # BR2_KERNEL_HEADERS_2_4_27 is not set
>> # BR2_KERNEL_HEADERS_2_4_29 is not set
>> # BR2_KERNEL_HEADERS_2_4_31 is not set
>> # BR2_KERNEL_HEADERS_2_6_9 is not set
>> # BR2_KERNEL_HEADERS_2_6_11 is not set
>> BR2_KERNEL_HEADERS_2_6_12=y
>> BR2_DEFAULT_KERNEL_HEADERS="2.6.12"
>>
>> #
>> # uClibc Options
>> #
>> BR2_UCLIBC_VERSION_SNAPSHOT=y
>> BR2_USE_UCLIBC_SNAPSHOT="snapshot"
>> # BR2_ENABLE_LOCALE is not set
>> # BR2_PTHREADS_NONE is not set
>> # BR2_PTHREADS is not set
>> BR2_PTHREADS_OLD=y
>> # BR2_PTHREADS_NATIVE is not set
>>
>> #
>> # Binutils Options
>> #
>> # BR2_BINUTILS_VERSION_2_14_90_0_8 is not set
>> # BR2_BINUTILS_VERSION_2_15 is not set
>> # BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set
>> # BR2_BINUTILS_VERSION_2_15_97 is not set
>> # BR2_BINUTILS_VERSION_2_16 is not set
>> # BR2_BINUTILS_VERSION_2_16_1 is not set
>> # BR2_BINUTILS_VERSION_2_16_90_0_3 is not set
>> # BR2_BINUTILS_VERSION_2_16_91_0_2 is not set
>> # BR2_BINUTILS_VERSION_2_16_91_0_3 is not set
>> BR2_BINUTILS_VERSION_2_16_91_0_4=y
>> # BR2_BINUTILS_VERSION_2_16_91_0_5 is not set
>> BR2_BINUTILS_VERSION="2.16.91.0.4"
>>
>> #
>> # Gcc Options
>> #
>> # BR2_GCC_VERSION_3_3_5 is not set
>> # BR2_GCC_VERSION_3_3_6 is not set
>> BR2_GCC_VERSION_3_4_2=y
>> # BR2_GCC_VERSION_3_4_3 is not set
>> # BR2_GCC_VERSION_3_4_4 is not set
>> # BR2_GCC_VERSION_3_4_5 is not set
>> # BR2_GCC_VERSION_4_0_0 is not set
>> # BR2_GCC_VERSION_4_0_1 is not set
>> # BR2_GCC_VERSION_4_0_2 is not set
>> # BR2_GCC_VERSION_4_1_0 is not set
>> # BR2_GCC_VERSION_4_2_0 is not set
>> BR2_GCC_VERSION="3.4.2"
>> # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
>> BR2_EXTRA_GCC_CONFIG_OPTIONS=""
>> BR2_INSTALL_LIBSTDCPP=y
>> # BR2_INSTALL_LIBGCJ is not set
>> # BR2_INSTALL_OBJC is not set
>>
>> #
>> # Ccache Options
>> #
>> BR2_CCACHE=y
>>
>> #
>> # Gdb Options
>> #
>> # BR2_PACKAGE_GDB is not set
>> # BR2_PACKAGE_GDB_SERVER is not set
>> # BR2_PACKAGE_GDB_CLIENT is not set
>>
>> #
>> # elf2flt
>> #
>> # BR2_ELF2FLT is not set
>>
>> #
>> # Common Toolchain Options
>> #
>> BR2_PACKAGE_SSTRIP_TARGET=y
>> BR2_PACKAGE_SSTRIP_HOST=y
>> BR2_ENABLE_MULTILIB=y
>> BR2_LARGEFILE=y
>> BR2_TARGET_OPTIMIZATION="-Os -pipe"
>> BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
>>
>> #
>> # Package Selection for the target
>> #
>>
>> #
>> # The default minimal system
>> #
>> BR2_PACKAGE_BUSYBOX=y
>> BR2_PACKAGE_BUSYBOX_SNAPSHOT=y
>> BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
>> BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox.config"
>>
>> #
>> # The minimum needed to build a uClibc development system
>> #
>> BR2_PACKAGE_BASH=y
>> # BR2_PACKAGE_BZIP2 is not set
>> # BR2_PACKAGE_COREUTILS is not set
>> # BR2_PACKAGE_DIFFUTILS is not set
>> # BR2_PACKAGE_ED is not set
>> # BR2_PACKAGE_FINDUTILS is not set
>> # BR2_PACKAGE_FLEX is not set
>> # BR2_PACKAGE_GAWK is not set
>> # BR2_PACKAGE_GCC_TARGET is not set
>> # BR2_PACKAGE_CCACHE_TARGET is not set
>> # BR2_PACKAGE_GREP is not set
>> # BR2_PACKAGE_MAKE is not set
>> # BR2_PACKAGE_PATCH is not set
>> # BR2_PACKAGE_SED is not set
>> # BR2_PACKAGE_TAR is not set
>>
>> #
>> # Other stuff
>> #
>> # BR2_PACKAGE_ACPID is not set
>> # BR2_PACKAGE_AT is not set
>> # BR2_PACKAGE_AUTOCONF is not set
>> # BR2_PACKAGE_AUTOMAKE is not set
>> # BR2_PACKAGE_BERKELEYDB is not set
>> # BR2_PACKAGE_BISON is not set
>> # BR2_PACKAGE_BOA is not set
>> # BR2_PACKAGE_BRIDGE is not set
>> # BR2_PACKAGE_CUSTOMIZE is not set
>> # BR2_PACKAGE_ISC_DHCP is not set
>> # BR2_PACKAGE_DIRECTFB is not set
>> # BR2_PACKAGE_DISTCC is not set
>> # BR2_PACKAGE_DM is not set
>> # BR2_PACKAGE_DNSMASQ is not set
>> # BR2_PACKAGE_DROPBEAR is not set
>> # BR2_PACKAGE_E2FSPROGS is not set
>> # BR2_PACKAGE_FAKEROOT is not set
>> # BR2_PACKAGE_FILE is not set
>> # BR2_PACKAGE_FREETYPE is not set
>> # BR2_PACKAGE_GETTEXT is not set
>> # BR2_PACKAGE_GZIP is not set
>> # BR2_PACKAGE_HOSTAP is not set
>> # BR2_PACKAGE_HOTPLUG is not set
>> # BR2_PACKAGE_IOSTAT is not set
>> # BR2_PACKAGE_IPROUTE2 is not set
>> # BR2_PACKAGE_IPTABLES is not set
>> # BR2_PACKAGE_JPEG is not set
>> # BR2_PACKAGE_LESS is not set
>> # BR2_PACKAGE_LIBELF is not set
>> # BR2_PACKAGE_LIBFLOAT is not set
>> # BR2_PACKAGE_LIBGLIB12 is not set
>> # BR2_PACKAGE_LIBMAD is not set
>> # BR2_PACKAGE_LIBPCAP is not set
>> # BR2_PACKAGE_LIBPNG is not set
>> # BR2_PACKAGE_LIBSYSFS is not set
>> # BR2_PACKAGE_LIBTOOL is not set
>> # BR2_PACKAGE_LIBUSB is not set
>> # BR2_PACKAGE_LINKS is not set
>> # BR2_PACKAGE_LRZSZ is not set
>> # BR2_PACKAGE_LTP-TESTSUITE is not set
>> # BR2_PACKAGE_LTT is not set
>> # BR2_PACKAGE_LVM2 is not set
>> # BR2_PACKAGE_LZO is not set
>> # BR2_PACKAGE_M4 is not set
>> # BR2_PACKAGE_MDADM is not set
>> # BR2_PACKAGE_MEMTESTER is not set
>> # BR2_PACKAGE_MICROCOM is not set
>> # BR2_PACKAGE_MICROPERL is not set
>> # BR2_PACKAGE_MICROWIN is not set
>> # BR2_PACKAGE_MKDOSFS is not set
>> # BR2_PACKAGE_MODULE_INIT_TOOLS is not set
>> # BR2_PACKAGE_MODUTILS is not set
>> # BR2_PACKAGE_MPG123 is not set
>> # BR2_PACKAGE_MROUTED is not set
>> # BR2_PACKAGE_MTD is not set
>> # BR2_PACKAGE_NANO is not set
>> # BR2_PACKAGE_NCURSES is not set
>> # BR2_PACKAGE_NETKITBASE is not set
>> # BR2_PACKAGE_NETKITTELNET is not set
>> # BR2_PACKAGE_NETSNMP is not set
>> # BR2_PACKAGE_NEWT is not set
>> # BR2_PACKAGE_NTP is not set
>> # BR2_PACKAGE_OPENNTPD is not set
>> # BR2_PACKAGE_OPENSSH is not set
>> # BR2_PACKAGE_OPENSSL is not set
>> # BR2_PACKAGE_OPENVPN is not set
>> # BR2_PACKAGE_PCIUTILS is not set
>> # BR2_PACKAGE_PORTAGE is not set
>> # BR2_PACKAGE_PORTMAP is not set
>> # BR2_PACKAGE_PPPD is not set
>> # BR2_PACKAGE_PROCPS is not set
>> # BR2_PACKAGE_PSMISC is not set
>> # BR2_PACKAGE_PYTHON is not set
>> # BR2_PACKAGE_QTE is not set
>> BR2_QTE_TMAKE_VERSION="1.13"
>> # BR2_PACKAGE_RAIDTOOLS is not set
>> # BR2_READLINE is not set
>> # BR2_PACKAGE_RSYNC is not set
>> # BR2_PACKAGE_RXVT is not set
>> # BR2_PACKAGE_SDL is not set
>> # BR2_PACKAGE_SFDISK is not set
>> # BR2_PACKAGE_SLANG is not set
>> # BR2_PACKAGE_SMARTMONTOOLS is not set
>> # BR2_PACKAGE_SOCAT is not set
>> # BR2_PACKAGE_STRACE is not set
>> # BR2_PACKAGE_SYSKLOGD is not set
>> # BR2_PACKAGE_SYSVINIT is not set
>> # BR2_PACKAGE_TCL is not set
>> # BR2_PACKAGE_TCPDUMP is not set
>> # BR2_PACKAGE_TFTPD is not set
>> # BR2_PACKAGE_TINYLOGIN is not set
>> # BR2_PACKAGE_TINYX is not set
>> # BR2_PACKAGE_TN5250 is not set
>> # BR2_PACKAGE_TTCP is not set
>> # BR2_PACKAGE_UDEV is not set
>> # BR2_PACKAGE_UDHCP is not set
>> # BR2_PACKAGE_USBUTILS is not set
>> # BR2_PACKAGE_UTIL-LINUX is not set
>> # BR2_PACKAGE_VALGRIND is not set
>> # BR2_PACKAGE_VTUN is not set
>> # BR2_PACKAGE_WGET is not set
>> # BR2_PACKAGE_WHICH is not set
>> # BR2_PACKAGE_WIRELESS_TOOLS is not set
>> # BR2_PACKAGE_XFSPROGS is not set
>> # BR2_PACKAGE_XORG is not set
>> # BR2_PACKAGE_ZLIB is not set
>>
>> #
>> # Target Options
>> #
>>
>> #
>> # filesystem for target device
>> #
>> # BR2_TARGET_ROOTFS_CRAMFS is not set
>> BR2_TARGET_ROOTFS_EXT2=y
>> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
>> BR2_TARGET_ROOTFS_EXT2_INODES=0
>> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
>> BR2_TARGET_ROOTFS_EXT2_SQUASH=y
>> BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
>> # BR2_TARGET_ROOTFS_EXT2_GZ is not set
>> BR2_TARGET_ROOTFS_EXT2_COPYTO=""
>> # BR2_TARGET_ROOTFS_JFFS2 is not set
>> # BR2_TARGET_ROOTFS_SQUASHFS is not set
>> # BR2_TARGET_ROOTFS_TAR is not set
>>
>> #
>> # bootloader for target device
>> #
>> # BR2_TARGET_GRUB is not set
>> # BR2_TARGET_SYSLINUX is not set
>>
>> #
>> # Board Support Options
>> #
>> # BR2_TARGET_SOEKRIS_NET4521 is not set
>> # BR2_TARGET_VIA_EPIA_MII is not set
>>
>> #
>> # Generic System Support
>> #
>> # BR2_TARGET_GENERIC_ACCESS_POINT is not set
>> # BR2_TARGET_GENERIC_FIREWALL is not set
>> # BR2_TARGET_GENERIC_DEV_SYSTEM is not set
>> _______________________________________________
>> uClibc mailing list
>> uClibc at uclibc.org
>> http://busybox.net/cgi-bin/mailman/listinfo/uclibc
>
>
>
>