[uClibc] buildroot error building ARM version on linux

[John Lewis]

At 06:02 AM 1/23/2004, Manuel Novoa III wrote:
> > checking whether the C compiler (
> > /home/john/buildroot/toolchain_build_arm_nofpu/gcc-3.3-final/gcc/xgcc
> > -B/home/john/buildroot/toolchain_build_arm_nofpu/gcc-3.3-final/gcc/
> > -msoft-float
> > -B/home/john/buildroot/build_arm_nofpu/staging_dir/arm-linux-uclibc/bin/
> > -B/home/john/buildroot/build_arm_nofpu/staging_dir/arm-linux-uclibc/lib/
> > -isystem
> > /home/john/buildroot/build_arm_nofpu/staging_dir/arm-linux-uclibc/include
> > -g -Os ) works... no
> > configure: error: installation or configuration problem: C compiler
> > cannot create executables.
> > make[1]: *** [configure-target-libiberty] Error 1
> > make[1]: Leaving directory
> > `/home/john/buildroot/toolchain_build_arm_nofpu/gcc-3.3-final'
> > make: ***
> > [/home/john/buildroot/toolchain_build_arm_nofpu/gcc-3.3-final/.compiled]
> > Error 2
> >
> > Any ideas?
> >
> > Here's the beginning of my makefile if that helps:
>
>I don't think you posted the correct Makefile.  In the one you posted,
>SOFT_FLOAT was set to false.  But in the above build log excerpt, you
>are obviously building with soft float enabled.

You are correct. So much for trying to paste things into emails at 4:00am. ;-)

Ok, I have tried it with the Makefile shown both with SOFT_FLOAT set to 
both true and false. In both cases, I get the above error. Otherwise, the 
builds are identical.

Any help would be greatly appreciated.

Thanks.

John Lewis
V.P. of Engineering
Handheld Entertainment
http://www.hheld.com