[uClibc-cvs] svn commit: trunk/uClibc/ldso/ldso: arm cris i386 m68k mips powerpc sh spar etc...

jocke at uclibc.org jocke at uclibc.org
Thu Mar 17 17:14:08 UTC 2005


Author: jocke
Date: 2005-03-17 10:14:06 -0700 (Thu, 17 Mar 2005)
New Revision: 10036

Log:
General arch cleanup and prepare support for standalone
execution of ldso.
Added new asm for MIPS to be tested.
All arches should retest.


Modified:
   trunk/uClibc/ldso/ldso/Makefile
   trunk/uClibc/ldso/ldso/arm/dl-startup.h
   trunk/uClibc/ldso/ldso/arm/dl-sysdep.h
   trunk/uClibc/ldso/ldso/cris/dl-startup.h
   trunk/uClibc/ldso/ldso/cris/dl-sysdep.h
   trunk/uClibc/ldso/ldso/dl-startup.c
   trunk/uClibc/ldso/ldso/i386/dl-startup.h
   trunk/uClibc/ldso/ldso/i386/dl-sysdep.h
   trunk/uClibc/ldso/ldso/ldso.c
   trunk/uClibc/ldso/ldso/m68k/dl-sysdep.h
   trunk/uClibc/ldso/ldso/mips/dl-startup.h
   trunk/uClibc/ldso/ldso/powerpc/dl-startup.h
   trunk/uClibc/ldso/ldso/sh/dl-startup.h
   trunk/uClibc/ldso/ldso/sh/dl-sysdep.h
   trunk/uClibc/ldso/ldso/sparc/dl-startup.h


Changeset:
Modified: trunk/uClibc/ldso/ldso/Makefile
===================================================================
--- trunk/uClibc/ldso/ldso/Makefile	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/Makefile	2005-03-17 17:14:06 UTC (rev 10036)
@@ -73,7 +73,7 @@
 all: $(LDSO_FULLNAME)
 
 $(LDSO_FULLNAME): $(OBJS) $(DLINK_OBJS)
-	$(LD) $(LDFLAGS) -e _dl_boot -soname=$(UCLIBC_LDSO) \
+	$(LD) $(LDFLAGS) -soname=$(UCLIBC_LDSO) \
 		-o $(LDSO_FULLNAME) $(OBJS) $(LIBGCC)
 	$(INSTALL) -d $(TOPDIR)lib
 	$(INSTALL) -m 755 $(LDSO_FULLNAME) $(TOPDIR)lib

Modified: trunk/uClibc/ldso/ldso/arm/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/arm/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/arm/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -4,29 +4,26 @@
  * Copyright (C) 2000-2004 by Erik Andersen <andersen at codepoet.org>
  */
 
-void* _dl_boot(void);
-/* Overrive the default _dl_boot function, and replace it with a bit of asm.
- * Then call the real _dl_boot function, which is now named _dl_boot2. */
-asm(""						\
-"	.text\n"				\
-"	.globl	_dl_boot\n"		\
-"_dl_boot:\n"				\
-"	mov	r7, sp\n"			\
-"	@ldr	r0, [sp], #4\n"	\
-"	mov	r0, sp\n"			\
-"	bl	_dl_boot2\n"		\
-"	mov	r6, r0\n"			\
-"	mov	r0, r7\n"			\
-"	mov	pc, r6\n"			\
+asm(
+    "	.text\n"
+    "	.globl	_start\n"
+    "	.type	_start,%function\n"
+    "_start:\n"
+    "	mov	r7, sp\n"
+    "	@ldr	r0, [sp], #4\n"
+    "	mov	r0, sp\n"
+    "	bl	_dl_start\n"
+    "	mov	r6, r0\n"
+    "	mov	r0, r7\n"
+    "	mov	pc, r6\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
 );
 
-#define DL_BOOT(X)   static __attribute_used__ void* _dl_boot2 (X)
-
-
 /* Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to
  * do something a little more subtle here.  */
-#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long*)   ARGS)
+#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long*)ARGS)+1)
 
 /* Handle relocation of the symbols in the dynamic loader. */
 static inline
@@ -91,5 +88,3 @@
  * done.  This routine has to exit the current function, then call the
  * _dl_elf_main function.  */
 #define START()   return _dl_elf_main;
-
-

Modified: trunk/uClibc/ldso/ldso/arm/dl-sysdep.h
===================================================================
--- trunk/uClibc/ldso/ldso/arm/dl-sysdep.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/arm/dl-sysdep.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -82,10 +82,10 @@
 static inline Elf32_Addr __attribute__ ((unused))
 elf_machine_load_address (void)
 {
-	extern void __dl_boot asm ("_dl_boot");
-	Elf32_Addr got_addr = (Elf32_Addr) &__dl_boot;
+	extern void __dl_start asm ("_dl_start");
+	Elf32_Addr got_addr = (Elf32_Addr) &__dl_start;
 	Elf32_Addr pcrel_addr;
-	asm ("adr %0, _dl_boot" : "=r" (pcrel_addr));
+	asm ("adr %0, _dl_start" : "=r" (pcrel_addr));
 	return pcrel_addr - got_addr;
 }
 

Modified: trunk/uClibc/ldso/ldso/cris/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/cris/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/cris/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -6,22 +6,25 @@
  * can find argc, argv and auxvt (Auxillary Vector Table).  */
 asm(""					\
 "	.text\n"			\
-"	.globl _dl_boot\n"		\
-"	.type _dl_boot, at function\n"	\
-"_dl_boot:\n"				\
+"	.globl _start\n"		\
+"	.type _start, at function\n"	\
+"_start:\n"				\
 "	move.d $sp,$r10\n"		\
 "	move.d $pc,$r9\n"		\
-"	add.d _dl_boot2 - ., $r9\n"	\
+"	add.d _dl_start - ., $r9\n"	\
 "	jsr $r9\n"			\
+"	moveq 0,$r8\n"			\
+"	move $r8,$srp\n"		\
+"	jump $r10\n"			\
+"	.size _start,.-_start\n"	\
+"	.previous\n"			\
 );
 
-#define DL_BOOT(X) static void __attribute_used__ _dl_boot2 (X)
 
-
 /* Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to
  * do something a little more subtle here.  */
-#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long *) ARGS)
+#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long *) ARGS)+1)
 
 /* Handle relocation of the symbols in the dynamic loader. */
 static inline
@@ -54,10 +57,4 @@
 /* Transfer control to the user's application, once the dynamic loader is
  * done.  This routine has to exit the current function, then call the
  * _dl_elf_main function.  */
-#define START() __asm__ volatile ("moveq 0,$r8\n\t" \
-				  "move $r8,$srp\n\t" \
-				  "move.d %1,$sp\n\t" \
-				  "jump %0\n\t" \
-				  : : "r" (_dl_elf_main), "r" (args))
-
-
+#define START()     return _dl_elf_main

Modified: trunk/uClibc/ldso/ldso/cris/dl-sysdep.h
===================================================================
--- trunk/uClibc/ldso/ldso/cris/dl-sysdep.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/cris/dl-sysdep.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -105,8 +105,8 @@
 {
 	Elf32_Addr gotaddr_diff;
 
-	__asm__ ("sub.d [$r0+_dl_parse:GOT16],$r0,%0\n\t"
-	         "add.d _dl_parse:GOTOFF,%0" : "=r" (gotaddr_diff));
+	__asm__ ("sub.d [$r0+_dl_start:GOT16],$r0,%0\n\t"
+	         "add.d _dl_start:GOTOFF,%0" : "=r" (gotaddr_diff));
 	return gotaddr_diff;
 }
 

Modified: trunk/uClibc/ldso/ldso/dl-startup.c
===================================================================
--- trunk/uClibc/ldso/ldso/dl-startup.c	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/dl-startup.c	2005-03-17 17:14:06 UTC (rev 10036)
@@ -3,6 +3,7 @@
  * Program to load an ELF binary on a linux system, and run it
  * after resolving ELF shared library symbols
  *
+ * Copyright (C) 2005 by Joakim Tjernlund
  * Copyright (C) 2000-2004 by Erik Andersen <andersen at codepoet.org>
  * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
  *				David Engel, Hongjiu Lu and Mitch D'Souza
@@ -109,7 +110,7 @@
         NULL
 		auxvt[0...N]   Auxiliary Vector Table elements (mixed types)
 */
-DL_BOOT(unsigned long args)
+static void * __attribute_used__ _dl_start(unsigned long args)
 {
 	unsigned int argc;
 	char **argv, **envp;
@@ -123,12 +124,7 @@
 	Elf32_auxv_t auxvt[AT_EGID + 1];
 	Elf32_Dyn *dpnt;
 	int indx;
-#if defined(__i386__)
-	int status = 0;
-#endif
 
-
-
 	/* WARNING! -- we cannot make _any_ funtion calls until we have
 	 * taken care of fixing up our own relocations.  Making static
 	 * inline calls is ok, but _no_ function calls.  Not yet
@@ -137,9 +133,6 @@
 	/* First obtain the information on the stack that tells us more about
 	   what binary is loaded, where it is loaded, etc, etc */
 	GET_ARGV(aux_dat, args);
-#if defined (__arm__) || defined (__mips__) || defined (__cris__)
-	aux_dat += 1;
-#endif
 	argc = *(aux_dat - 1);
 	argv = (char **) aux_dat;
 	aux_dat += argc;			/* Skip over the argv pointers */
@@ -327,12 +320,12 @@
 		}
 	}
 #endif
-#if defined(__mips__)
+#ifdef PERFORM_BOOTSTRAP_GOT
 #ifdef __SUPPORT_LD_DEBUG_EARLY__
-	SEND_STDERR("About to do MIPS specific GOT bootstrap\n");
+	SEND_STDERR("About to do specific GOT bootstrap\n");
 #endif
 	/* For MIPS we have to do stuff to the GOT before we do relocations.  */
-	PERFORM_BOOTSTRAP_GOT(got, tpnt);
+	PERFORM_BOOTSTRAP_GOT(tpnt);
 #endif
 
 	/* OK, now do the relocations.  We do not do a lazy binding here, so

Modified: trunk/uClibc/ldso/ldso/i386/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/i386/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/i386/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -4,8 +4,15 @@
  * Copyright (C) 2000-2004 by Erik Andersen <andersen at codepoet.org>
  */
 
-/* For x86 we do not need any special setup so go right to _dl_boot() */
-#define DL_BOOT(X) __attribute_used__ void _dl_boot (X)
+asm(
+    "	.text\n"
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	.set	_start,_dl_start\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
+);
 
 /* Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to
@@ -40,7 +47,9 @@
 /* Transfer control to the user's application, once the dynamic loader is
  * done.  This routine has to exit the current function, then call the
  * _dl_elf_main function.  */
-#define START()											\
-	__asm__ volatile ("leave\n\t"						\
-		    "jmp *%%eax\n\t"							\
-		    : "=a" (status) :	"a" (_dl_elf_main))
+#define START() {							\
+	int status = 0;							\
+	__asm__ volatile ("leave\n\t"					\
+		    "jmp *%%eax\n\t"					\
+		    : "=a" (status) :	"a" (_dl_elf_main));		\
+}

Modified: trunk/uClibc/ldso/ldso/i386/dl-sysdep.h
===================================================================
--- trunk/uClibc/ldso/ldso/i386/dl-sysdep.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/i386/dl-sysdep.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -61,8 +61,8 @@
 	   via the GOT to make sure the compiler initialized %ebx in time.  */
 	extern int _dl_errno;
 	Elf32_Addr addr;
-	asm ("leal _dl_boot at GOTOFF(%%ebx), %0\n"
-	     "subl _dl_boot at GOT(%%ebx), %0"
+	asm ("leal _dl_start at GOTOFF(%%ebx), %0\n"
+	     "subl _dl_start at GOT(%%ebx), %0"
 	     : "=r" (addr) : "m" (_dl_errno) : "cc");
 	return addr;
 }

Modified: trunk/uClibc/ldso/ldso/ldso.c
===================================================================
--- trunk/uClibc/ldso/ldso/ldso.c	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/ldso.c	2005-03-17 17:14:06 UTC (rev 10036)
@@ -3,6 +3,7 @@
  * Program to load an ELF binary on a linux system, and run it
  * after resolving ELF shared library symbols
  *
+ * Copyright (C) 2005 by Joakim Tjernlund
  * Copyright (C) 2000-2004 by Erik Andersen <andersen at codepoet.org>
  * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
  *				David Engel, Hongjiu Lu and Mitch D'Souza
@@ -82,6 +83,8 @@
 }
 #endif
 
+extern void _start(void);
+
 void _dl_get_ready_to_run(struct elf_resolve *tpnt, unsigned long load_addr,
 			  Elf32_auxv_t auxvt[AT_EGID + 1], char **envp,
 			  char **argv)
@@ -129,6 +132,11 @@
 		_dl_progname = argv[0];
 	}
 
+	if (_start == (void *) auxvt[AT_ENTRY].a_un.a_fcn) {
+		_dl_dprintf(2, "Standalone exection is not supported yet\n");
+		_dl_exit(1);
+	}
+
 	/* Start to build the tables of the modules that are required for
 	 * this beast to run.  We start with the basic executable, and then
 	 * go from there.  Eventually we will run across ourself, and we

Modified: trunk/uClibc/ldso/ldso/m68k/dl-sysdep.h
===================================================================
--- trunk/uClibc/ldso/ldso/m68k/dl-sysdep.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/m68k/dl-sysdep.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -58,8 +58,8 @@
 elf_machine_load_address (void)
 {
 	Elf32_Addr addr;
-	asm ("lea _dl_boot(%%pc), %0\n\t"
-	     "sub.l _dl_boot at GOT.w(%%a5), %0"
+	asm ("lea _dl_start(%%pc), %0\n\t"
+	     "sub.l _dl_start at GOT.w(%%a5), %0"
 	     : "=a" (addr));
 	return addr;
 }

Modified: trunk/uClibc/ldso/ldso/mips/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/mips/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/mips/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -1,54 +1,126 @@
 /* Any assmbly language/system dependent hacks needed to setup boot1.c so it
  * will work as expected and cope with whatever platform specific wierdness is
  * needed for this architecture.
+ * Copyright (C) 2005 by Joakim Tjernlund
  */
 
-asm("" \
-"	.text\n"			\
-"	.globl	_dl_boot\n"		\
-"_dl_boot:\n"				\
-"	.set noreorder\n"		\
-"	bltzal $0, 0f\n"		\
-"	nop\n"				\
-"0:	.cpload $31\n"			\
-"	.set reorder\n"			\
-"	la $4, _DYNAMIC\n"		\
-"	sw $4, -0x7ff0($28)\n"	        \
-"	move $4, $29\n"			\
-"	la $8, coff\n"			\
-"	.set noreorder\n"		\
-"	bltzal $0, coff\n"		\
-"	nop\n"				\
-"coff:	subu $8, $31, $8\n"		\
-"	.set reorder\n"			\
-"	la $25, _dl_boot2\n"	        \
-"	addu $25, $8\n"			\
-"	jalr $25\n"			\
-"	lw $4, 0($29)\n"		\
-"	la $5, 4($29)\n"		\
-"	sll $6, $4, 2\n"		\
-"	addu $6, $6, $5\n"		\
-"	addu $6, $6, 4\n"		\
-"	la $7, _dl_elf_main\n"		\
-"	lw $25, 0($7)\n"		\
-"	jr $25\n"			\
+#if 0
+asm(""
+    "	.text\n"
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	.set noreorder\n"
+    "	bltzal $0, 0f\n"
+    "	nop\n"
+    "0:	.cpload $31\n"
+    "	.set reorder\n"
+    "	la $4, _DYNAMIC\n"
+    "	sw $4, -0x7ff0($28)\n"
+    "	move $4, $29\n"
+    "	la $8, coff\n"
+    "	.set noreorder\n"
+    "	bltzal $0, coff\n"
+    "	nop\n"
+    "coff:	subu $8, $31, $8\n"
+    "	.set reorder\n"
+    "	la $25, _dl_start\n"
+    "	addu $25, $8\n"
+    "	jalr $25\n"
+    "	lw $4, 0($29)\n"
+    "	la $5, 4($29)\n"
+    "	sll $6, $4, 2\n"
+    "	addu $6, $6, $5\n"
+    "	addu $6, $6, 4\n"
+    "	la $7, _dl_elf_main\n"
+    "	lw $25, 0($7)\n"
+    "	jr $25\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
 );
+#endif
+#if 0
+asm(""
+    "	.text\n"
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	.set noreorder\n"
+    "	bltzal $0, 0f\n"
+    "	nop\n"
+    "0:	.cpload $31\n"
+    "	.set reorder\n"
+    "	la $4, _DYNAMIC\n"
+    "	sw $4, -0x7ff0($28)\n"
+    "	move $4, $29\n"
+    "	la $8, coff\n"
+    "	.set noreorder\n"
+    "	bltzal $0, coff\n"
+    "	nop\n"
+    "coff:	subu $8, $31, $8\n"
+    "	.set reorder\n"
+    "	la $25, _dl_start\n"
+    "	addu $25, $8\n"
+    "	jalr $25\n"
+    "	move $17, $2\n"
+    "	lw $4, 0($29)\n"
+    "	la $5, 4($29)\n"
+    "	sll $6, $4, 2\n"
+    "	addu $6, $6, $5\n"
+    "	addu $6, $6, 4\n"
+    "	move $25, $17\n"
+    "	jr $25\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
+);
+#endif
+asm(""
+    "	.text\n"
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	.set noreorder\n"
+    "	bltzal $0, 0f\n"
+    "	nop\n"
+    "0:	.cpload $31\n"
+    "	.set reorder\n"
+    "	la $4, _DYNAMIC\n"
+    "	sw $4, -0x7ff0($28)\n"
+    "	move $4, $29\n"
+    "	subu $29, 16\n"
+    "	la $8, coff\n"
+    "	.set noreorder\n"
+    "	bltzal $8, coff\n"
+    "coff:	subu $8, $31, $8\n"
+    "	.set reorder\n"
+    "	la $25, _dl_start\n"
+    "	addu $25, $8\n"
+    "	jalr $25\n"
+    "	move $17, $2\n"
+    "	lw $4, 0($29)\n"
+    "	la $5, 4($29)\n"
+    "	sll $6, $4, 2\n"
+    "	addu $6, $6, $5\n"
+    "	addu $6, $6, 4\n"
+    "	move $25, $17\n"
+    "	jr $25\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
+);
 
-#define DL_BOOT(X)   static void __attribute_used__ _dl_boot2 (X)
-
 /*
  * Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to
  * do something a little more subtle here.
  */
-#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long *) ARGS)
+#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long *) ARGS)+1)
 
 
 /*
  * Here is a macro to perform the GOT relocation. This is only
  * used when bootstrapping the dynamic loader.
  */
-#define PERFORM_BOOTSTRAP_GOT(got, tpnt)					\
+#define PERFORM_BOOTSTRAP_GOT(tpnt)						\
 do {										\
 	Elf32_Sym *sym;								\
 	Elf32_Addr i;								\
@@ -115,7 +187,4 @@
  * because the stack doesn't get properly restored otherwise. Got look
  * at boot1_arch.h
  */
-#define START()
-
-
-
+#define START() return _dl_elf_main

Modified: trunk/uClibc/ldso/ldso/powerpc/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/powerpc/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/powerpc/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -1,29 +1,26 @@
 /* Any assmbly language/system dependent hacks needed to setup boot1.c so it
  * will work as expected and cope with whatever platform specific wierdness is
- * needed for this architecture.  */
+ * needed for this architecture.
+ * Copyright (C) 2005 by Joakim Tjernlund
+ */
 
-/* Overrive the default _dl_boot function, and replace it with a bit of asm.
- * Then call the real _dl_boot function, which is now named _dl_boot2. */
 asm(
     "	.text\n"
-    "	.globl	_dl_boot\n"
-    "	.type	_dl_boot, at function\n"
-    "_dl_boot:\n"
-    "	mr	3,1\n" /* Pass SP to _dl_boot2 in r3 */
-    "	addi	1,1,-16\n" /* Make room on stack for _dl_boot2 to store LR */
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	mr	3,1\n" /* Pass SP to _dl_start in r3 */
+    "	addi	1,1,-16\n" /* Make room on stack for _dl_start to store LR */
     "	li	4,0\n"
     "	stw	4,0(1)\n" /* Clear Stack frame */
-    "	bl	_dl_boot2 at local\n" /* Perform relocation */
+    "	bl	_dl_start at local\n" /* Perform relocation */
     "	addi	1,1,16\n" /* Restore SP */
     "	mtctr	3\n" /* Load applications entry point */
     "	bctr\n" /* Jump to entry point */
-    "	.size	_dl_boot,.-_dl_boot\n"
+    "	.size	_start,.-_start\n"
     "	.previous\n"
 );
 
-
-#define DL_BOOT(X) static void* __attribute_used__ _dl_boot2(X)
-
 /*
  * Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to

Modified: trunk/uClibc/ldso/ldso/sh/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/sh/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/sh/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -2,24 +2,23 @@
  * will work as expected and cope with whatever platform specific wierdness is
  * needed for this architecture.  */
 
-asm("" \
-"	.text\n"			\
-"	.globl	_dl_boot\n"		\
-"_dl_boot:\n"				\
-"	mov	r15, r4\n"		\
-"	mov.l   .L_dl_boot2, r0\n"	\
-"	bsrf    r0\n"			\
-"	add	#4, r4\n"		\
-".jmp_loc:\n"				\
-"	jmp	@r0\n"			\
-"	 mov    #0, r4 	!call _start with arg == 0\n" \
-".L_dl_boot2:\n"			\
-"	.long   _dl_boot2-.jmp_loc\n"	\
-"	.previous\n"			\
+asm(
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	mov	r15, r4\n"
+    "	mov.l   .L_dl_start, r0\n"
+    "	bsrf    r0\n"
+    "	add	#4, r4\n"
+    ".jmp_loc:\n"
+    "	jmp	@r0\n"
+    "	mov    #0, r4 	!call _start with arg == 0\n"
+    ".L_dl_start:\n"
+    "	.long   _dl_start-.jmp_loc\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
 );
 
-#define DL_BOOT(X)   static void* __attribute_used__ _dl_boot2 (X)
-
 /*
  * Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to

Modified: trunk/uClibc/ldso/ldso/sh/dl-sysdep.h
===================================================================
--- trunk/uClibc/ldso/ldso/sh/dl-sysdep.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/sh/dl-sysdep.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -120,8 +120,8 @@
         bra 2f\n\
          sub r0,r2\n\
         .align 2\n\
-        1: .long _dl_boot at GOT\n\
-        3: .long _dl_boot at GOTOFF\n\
+        1: .long _dl_start at GOT\n\
+        3: .long _dl_start at GOTOFF\n\
         2: mov r2,%0"
 	     : "=r" (addr) : : "r0", "r1", "r2");
 	return addr;

Modified: trunk/uClibc/ldso/ldso/sparc/dl-startup.h
===================================================================
--- trunk/uClibc/ldso/ldso/sparc/dl-startup.h	2005-03-17 06:41:59 UTC (rev 10035)
+++ trunk/uClibc/ldso/ldso/sparc/dl-startup.h	2005-03-17 17:14:06 UTC (rev 10036)
@@ -3,10 +3,16 @@
  * needed for this architecture.  See arm/boot1_arch.h for an example of what
  * can be done.
  */
+asm(
+    "	.text\n"
+    "	.globl	_start\n"
+    "	.type	_start, at function\n"
+    "_start:\n"
+    "	.set	_start,_dl_start\n"
+    "	.size	_start,.-_start\n"
+    "	.previous\n"
+);
 
-#define DL_BOOT(X) __attribute_used__ void _dl_boot (X)
-
-
 /*
  * Get a pointer to the argv array.  On many platforms this can be just
  * the address if the first argument, on other platforms we need to
@@ -56,7 +62,3 @@
 			   "restore %%g0,%%g0,%%g0\n\t" \
 		    	: /*"=r" (status) */ :	\
 		    	  "r" (_dl_elf_main): "g1", "o0", "o1")
-
-
-
-




More information about the uClibc-cvs mailing list